Micron AU8500 User Manual download pdf (Page 6)

MICRONAIR AU8500 ULV TREE SPRAYER

Power required 32 HP max at 540 RPM with low fan speed setting

75 HP max at 540 RPM with high fan speed setting

Fan output: 18,500 m3/hour at 540 RPM PTO speed with low fan speed

setting

22,700 m3/hour at 540 RPM PTO speed with high fan speed

setting

Air velocity: 57 m/sec (205 km/hr) at air outlet at 540 RPM PTO speed

with low fan speed setting

80 m/sec (288 km/hr) at air outlet at 540 RPM PTO speed

with high fan speed setting

Vertical coverage: 15 m max at 540 RPM PTO speed with low fan speed setting

20 m max at 540 RPM PTO speed with high fan speed

setting

Spray droplet size: Adjustable 50 – 150 µm VMD for typical ULV pesticide

formulations

Output rate: Adjustable 0 – 3.0 l/min

Output adjustment: By adjustable valve or interchangeable fixed restrictor

orifices

Pesticide tank: 100 litre capacity HDPE construction with 180 mm diameter

filling aperture and basket filter

Flushing tank: 10 litre capacity HDPE construction with 100 mm diameter

filling aperture and basket filter

Electrical power: 12 VDC @ 7 A (spray pump operating)

Power source: From 12 V tractor battery

Control box: Mounted in cab of tractor

Switch: Pump on/off

Indicators: Power on

Blower operating

Pump on

3. INSTALLATION

3.1. Preparation

The AU8500 is supplied with the air duct and atomiser disassembled for ease of

shipment. The sprayer must be assembled as follows prior to use:

1. Position the square flange at the base of the air outlet duct onto the flange at the

top of the blower fan. Rotate the air duct until the adjusting lever is to the front of

the sprayer (as viewed from the rear, looking towards the front of the tractor).

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Micron AU8500 User Manual Page 6