Micron MTFDDAK256MAM-1K1 Datasheet Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
Table 12: Identity Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
49 Capabilities
15–14 F 00b Reserved for the IDENTIFY PACKET DEVICE command.
13 F 1b 1 = Standby timer values as specified in this standard are
supported
0 = Standby timer values shall be managed by the device
12 F 0b Reserved for the IDENTIFY PACKET DEVICE command.
11 F 1b 1= IORDY supported
0 = IORDY may be supported
10 F 1b 1 = IORDY may be disabled
9 1b 1 = LBA supported
8 F 1b 1 = DMA supported.
7–0 F 00000000b Retired
50 Capabilities
15 F 0b Shall be cleared to zero
14 F 1b Shall be set to one
13–2 F 000000000000b Reserved
1 X 0b Obsolete
0 F 1b Shall be set to one to indicate a vendor specific standby tim-
er value minimum.
51 ( )X 0000h 0000h Obsolete
53 15–3 F 0000000000000b Reserved
2 F 1b 1 = the fields reported in word 88 are valid
0 = the fields reported in word 88 are not valid
1 F 1b 1 = the fields reported in words (70:64) are valid
0 = the fields reported in words (70:64) are not valid
0 X 1b Obsolete
54 ()X 3FFFh 0010h
003Fh FC10h
00FBh
Obsolete
59 15 F 0b 1 = The BLOCK ERASE EXT command is supported
14 F 0b 1 = The OVERWRITE EXT command is supported
13 F 0b 1 = The CRYPTO SCRAMBLE EXT command is supported
12 F 0b 1 = The Sanitize feature set is supported
11–9 F 000b Reserved
8 V 1b 1 = Multiple sector setting is valid
7–0 V 00000001b xxh = Current setting for number of logical sectors that shall
be transferred per DRQ data block on READ/WRITE MULTI-
PLE commands
60 M(F) Varies by capacity Total number of user addressable logical sectors
C400 2.5-Inch NAND Flash SSD
Device ID
PDF: 09005aef8455a0a5
realssd_c400_2_5.pdf - Rev. D 09/11 EN
11
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comments to this Manuals

No comments